Water X-Tract drainage channel is an interior baseboard system designed to collect water seepage entering the basement through the joint where the floor and walls meet. The hollow baseboard cove system is adhered watertight to the concrete floor using the Pro-SealOnce Adhesive. This non-invasive system is ideal for monolithic slabs. Water seeping in through the cold joint between the floor and walls is collected by the Water X-Tract System and quietly channeled around the perimeter to the sump pump. The key component to the success of the Water X-Tract System is the base design, using a concave ribbed base to hold sealant and compress sealant against the floor without the sealant escaping out from under it, creating a long lasting watertight bond. Extended toe on the leading edge keeps the system upright, keeping the top tight against the wall, and adds an additional area for a watertight fillet of sealant along the leading edge.
Pro-SealOnce Adhesive bonds water-tight in wet conditions!
Pro-SealOnce is a new generation sealant exclusive to our system. Pro-SealOnce Adhesive was specially designed to bond the Water X-Tract System watertight to the cement floor, even in wet conditions! Pro-SealOnce is a moisture activated sealant. Wet or dry the Pro-SealOnce will create a long lasting watertight bond! Simply clean and sponge the floor free of dirt and grime. Apply a tall, thick bead of Pro-SealOnce ot the bottom of the Water X-Tract main section. Set the system in place and gently press down the main section and hold in place for about 15 to 30 seconds.